Now Available with
The Verticals and the horizontals
Setting up 3 Screens PC 5760×1080 Triple HD Gaming. 11520×2160 Triple 4k Gaming.
1920×1080 HD times 3×1 = 5760×1080 =16×3 Aspect Ratio 48×9 *** correct***
3x 1920×1080 landscape = 5760×1080 = 6,220,800 pixels = 5.33:1 aspect ratio
3840×2160 4k times 3 = 11520×2160
Modded a Laptop cart from Walmart and a Triple Monitor Stand from Amazon along with various Cables/Hubs and IR.
Getting Nvidia Surround to work at HD and 4K Tools
You’re attempting to get Nvidia Surround working on your shiny new setup. You bought your monitors at different times, however, and you could never determine the sync polarity since most manufacturers don’t list it. Now when you go to set up Surround, it either doesn’t work at all or it defaults to first resolution that has the same polarity, which is usually ridiculously small and the wrong aspect ratio.
The idea is to trick Nvidia into thinking you have the same monitors, by forcing one of their drivers on the other two. I do not recommend trying this unless you’re sure the monitors are extremely similar, such as my Acer’s from above. If you mess up your monitor by putting a different manufacturer’s driver on it, you do so at your own risk. With that said, here’s the steps:
1.Download MonInfo. Open up this tool, and find the monitor you want to use in the top left dialog area. Select it and then choose File > Create INF to export a driver from the monitor. Save the file in a folder that has no other INF files, preferrably a new directory.
2.Install the latest Nvidia drivers (I used 301.42 WHQL) as a clean installation. Basically, we need to clear any Custom Resolutions and settings you may have created if you’ve been trying to fix this prior to starting these steps.
4.Go to the Device Manager and find your monitors. Regardless of how they’re listed, Right Click and uninstall each of them one by one. After they’ve all been removed, Scan for Hardware Changes so that Windows will put Generic PnP monitors in their place. What you want to do here is the important part. For each monitor, Right Click and choose Update Driver. Go through whatever steps you need to in order to get to the Have Disk menu, and select that you have a disk. When the Browse window opens up, navigate to the INF file you created earlier. Windows will complain about the driver not being signed (of course it isn’t, you made it!), so make sure to click allow/accept on any prompts that show up. Repeat this process for each of your monitors until the Device Manager shows them all as the same monitor, which was ‘G235H EDID Override’ in my case.
6.Open up your Nvidia Control Panel and go directly to the Surround setup, and choose configure. If all went well, Surround should now be working and correctly configurable.
7.If Surround didn’t work after this then try repeating the process, except use a different monitor as the driver to base your other monitors off of. I attempted to use the X233H driver for my other two monitors first to no avail, while using the G235H driver instead worked perfectly. Sometimes it just takes tinkering.
Monitor Asset Manager is a Plug and Play monitor information utility that works under all 32-bit and 64-bit versions of Windows
Other Tools you want to look into:
Flawless Widescreen – http://www.flawlesswidescreen.org/
Widescreen Fixer – https://www.widescreenfixer.org/
Getting Video standard or HD / 4k to Span across all screens.
Video on widescreen all screens
Easy Fix: Kodi – http://kodi.tv/
Download XBMC or Kodi Now. This will Span Video on all screens relatively easy. Enjoy 🙂
Second Fix: VLC Player- Download it. http://www.videolan.org/
You can use VLCplayer to split the video across all screens by setting up a Video wall or Video Desktop
Note: You must use the old VLCplayer V1.1.1 For the Video to go full screen.
Also Use VLCplayer To Pull Live Video from a Tuner Card and span it to all monitors
How to pull Video from tuner card with VLC Player
Tuner app must be started and running.
1 Put tuner on channel you want.
2 open VLC player
3 click media then Capture device.
4 set capture mode to: DVB DirectShow
5 set DVB type to: ATSC (For Locale HD)
6 set transponder/muliplex frequency to: Channel’s Frequency ( your tuner software should reveal this for you.
7 Set Bandwidth to: Undefined
Now use the Video Wall option mentioned above to get it to span all the monitors.
TV – Tuner Card Software
I found that the DVBViewer Pro Software is the Best and it’s just $10.00
Works with most PCi and USB tuner hardware.
Awsome Download: http://www.dvbviewer.com/en/index.php
Video to fill whole screen.
Please note: Aspect ratios mentioned above to get the correct Look with your current resolution.